Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Dyson Clean+Wash Hygiene: two-minute review
The Clean+Wash Hygiene is the second in Dyson’s hard floor cleaner line. Like its range-mate, the Dyson WashG1, it stands out for not using suction at all, but instead harnessing a mixture of ‘agitation, hydration and separation’ to get your hard floors squeaky clean.
Liquid waste is separated from solid, and one USP here is that all the waste is stored in the floorhead itself. Dyson says this is good news for longevity, because there are no pipes to get grimy or blocked up. I did find the emptying process a little fiddly, and the floorhead was drippier than other hard floor cleaners I’ve used.
There’s a self-clean cycle that runs fresh water through the system. It will likely require you to empty the dirty water tank and refill the clean one mid-cycle, but otherwise it’s effective at removing dirt from the roller. Dyson has also an added hot air drying here – it’s noisy but again, effective. Even after the muckiest of cleaning task, my roller looked good-as-new afterwards.
Bar some minor quibbles, I was impressed with this cleaner. Whether it’s worth the asking price is another thing – I’ve tested some of the best wet-and-dry vacuums on the market, and there’s little that stands out as truly exceptional here, unfortunately.
That’s the short version; read on for my full Dyson Clean+Wash Hygiene review.
Dyson Clean+Wash Hygiene review: price & availability
- List price: £429.99
- Available: Now in the UK, US and AU to follow
- Launched: December 2025
The Dyson Clean+Wash Hygiene went on sale in the UK in December 2025, at a list price of £429.99. It’s due to become available in the US and in Australia in 2026, but I don’t have any specifics or pricing yet – based on UK pricing, it might be around $600 / AU$850.
That’s in the premium band for a hard floor cleaner, and although the build quality is excellent and plenty of thought has clearly gone into the design, I don’t think it does quite enough to justify the price tag. For that kind of money I’d expect to see the option of suction, and special features like dirt detection, automatic adjustment, and even foam / steam functions.
- Value for money score: 3 out of 5
Dyson Clean+Wash Hygiene specs
|
Cleaner size (H x L x W): |
43.1 x 9.6 x 11 inches / 109.6 x 24.4 x 28cm |
|
Dock size (H x L x W): |
9.4 x 11 x 10.1 inches / 24 x 28 x 25.7cm |
|
Weight (empty): |
8.4lbs / 3.8kg |
|
Clean water tank volume: |
0.75L |
|
Dirty water tank volume: |
0.52L |
|
Max runtime: |
45 mins |
|
Dock cable length: |
5.9ft / 1.8m |
Dyson Clean+Wash Hygiene review: design
- Streamlined and relatively lightweight, and can lie flat
- Waste is stored in the floorhead, and separated into solids and liquids
- Self-clean function and hot air drying on the dock
The Dyson Clean+Wash Hygiene is a lightweight hard floor cleaner with a handful of interesting design features. Rather surprisingly given this brand’s heritage, there’s no suction here – instead, it uses hydration and agitation to remove dirt from hard flooring.
The roller spins at speed, and is continually fed with fresh water, as the dirty stuff is scraped off. It can handle mixed solid-and-liquid spills, and to a certain extent also dust and other dry debris (although it won’t be as effective as a regular stick vacuum here).
The roller is densely packed with fibers to make it as absorbent as possible, and Dyson has added wiry bristles that stick out a bit, for extra scrubbing power. There’s also an anti-tangle comb behind the roller to prevent hair wrap. On one side the roller goes right up close to the edge of the floorhead, but on the other there’s a decent chunk of casing. The roller can be removed for rinsing as required.
One of the areas where Dyson tends to shine in its floorcare range is maneuverability, but I didn’t find the Clean+Wash Hygiene quite as nimble as I expected. Don’t get me wrong, it’s far from cumbersome – it’s streamlined in design and pivots smoothly, but it felt a little less agile than something like the Dyson WashG1. I was impressed that it could lie completely flat to the ground, until the whole thing is just 4.44 inches / 11.3cm tall. A small wheel on the back of the handle helps it maneuver smoothly in this mode.
The dirty water compartment is integrated into the floorhead itself – similar to the mopping floorhead on the Dyson V15s Detect Submarine. The thinking is that because the dirt has nowhere to really travel, there’s no tubing to get clogged up. Liquid ends up in a dirty water tank, and solid waste is filtered out into a separate tray. The two compartments are removed as one, but getting them apart and then back together again is a little fiddly compared to other wet-dry vacuums I’ve tested… not to mention messier.
There are three hydration modes to choose from, and a Boost mode to add extra water for tackling dried-on dirt. Dyson proudly claims the 750ml clean water tank will cover an area of 350 sqm, leaving such a fine sheen of moisture that your floors will be dry within 60 seconds. There are no other special modes, such as automated setting adjustment.
One major upgrade on the Clean+Wash Hygiene compared to the WashG1 is that Dyson has introduced hot air drying on the dock. So after mopping, you run a self-clean cycle which runs fresh water over the roller. Then it’s dried using wafts of warm (185F / 85C) air, saving you from having to remove it and put it out somewhere to dry.
Dyson Clean+Wash Hygiene review: performance
- Efficient, relatively quiet cleaning of liquid and solid spills
- Floorhead a little drippy, and self-clean cycle uses a lot of water
- Mop drying rather noisy but effective
I started by filling up the clean water and embarking on a whole-floor clean. The roller saturated fairly quickly without any pre-wetting, and left an very light, even sheen of water on my vinyl flooring. It’s easy to toggle modes, and the screen spells out remaining cleaning time so you’ll never unexpectedly run out of battery.
Because there’s no suction, it’s relatively quiet in operation, and the runtimes are long too. The Clean+Wash Hygiene can last up to 45 minutes per charge.
Cleaning
To assess its capabilities more closely, I tested how the Dyson Clean+Wash Hygiene handled a range of tricky cleaning challenges. I started with soy sauce mixed with oats. It gobbled up all the oats in one forward and backward pass in Med mode – impressive, given there’s no suction here.
Then I decided it was time to bring out the big guns. I smeared maple syrup, crunchy peanut butter and Marmite (a super-sticky, viscous spread) on a vinyl floor. This time it struggled a bit. I unleashed Boost mode, and it took about 20 seconds of back-and-forth to clear the mess. That’s a decent result – this test is purposefully very tricky. Plus, there was no sticky residue left behind.
Like every wet-and-dry cleaner I’m aware of, this machine is only suitable for perfectly flat floors. It can’t deal with uneven surfaces such as flagstones, and it won’t get into the cracks between tiles either – although it does do a better job of this than some, thanks to those bristles in the roller.
Maintenance
After my mopping session, it was time to clean out the waste. Although I see the logic in separating liquid from solid waste, and I acknowledge the potential long-term maintenance benefits, the emptying process does feel fiddlier than usual.
Unlike on the WashG1, you can’t get your hand inside the dirty water tank to clean it out. The design of the tank also makes it very difficult to see when it’s filling up, although it will inform you on screen.
I also found the floorhead had a tendency to drip or leak dirty water when handled. No wet-dry vacuum is perfect in this respect, but this Dyson machine seems especially bad for it, perhaps because the waste compartments are relatively complicated in design, with lots of separate elements.
Next, I embarked on a self-clean cycle. This starts by flushing the system with fresh water to get rid of lingering dirt. Almost immediately, the machine paused and asked me to refill the clean water tank. After relaunching, it paused again and asked me to empty the dirty water.
I’d recommend doing both these things before launching a self-clean cycle, and again afterwards, to avoid annoying disruptions. The process uses more than half a tank of fresh water, so it’ll almost certainly be required.
Flushing complete, the dock then begins to dry the roller with hot air. This part is surprisingly noisy too, although it only lasts around half an hour. (On other machines I’ve used, the drying lasts longer but is much quieter, and on some advanced models you have the option of short-and-noisy or long-and-quiet.) Afterwards, I inspected the roller and it was almost completely dry, with no dirt to speak of.
- Performance score: 4 out of 5
Dyson Clean+Wash Hygiene: Scorecard
|
Attribute |
Notes |
Rating |
|---|---|---|
|
Value |
Well-built and solid quality, but little in terms of features to justify the premium price. |
3 / 5 |
|
Design |
Streamlined, lightweight and can lie flat. Slightly fiddly and messy waste disposal setup. |
3.5 / 5 |
|
Performance |
Effective at cleaning solid and liquid spills, even without suction. Self-clean works well too. |
4 / 5 |
How I tested the Dyson Clean+Wash Hygiene
I used the Dyson Clean+Wash Hygiene for a couple of weeks on my hard floors. Aside from day-to-day use, I ran a series of dedicated cleaning tests to see how it coped with different kinds of messes, including liquid-solid spills, sticky and viscous substances. I compared my findings with other hard floor cleaners, and assessed if this model offered strong value for money.
Read more about how we test
- First reviewed January 2026
Read the full article here
