Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
DXRacer Martian Pro: One-minute review
I knew the DXRacer Martian Pro would be one of the best gaming chairs I’ve ever sat in, and three months with it have only confirmed my suspicions.
I tried a similar chair at CES 2025 – one that can heat you up and cool you down thanks to built-in tech, and I have genuinely thought about it every week since then – and the Martian Pro somehow also takes things up another notch with an in-built massager too, increasing its comfortable gaming chair credentials further still.
When it’s a cold day, you can turn on the seat heater to warm you up, the fan to cool you down, and the massager to relax you. I promise it’s as great as it sounds
What’s more, despite all these technological features, it still feels soft and comfortable for long working days and gaming sessions thanks to plenty of cushioning, a 4D lumbar airbag you can tune perfectly to your needs, and a magnetic headrest you can position perfectly every time. Did I mention the 4D armrest,s too?
All that’s to say, this gaming chair not only hits the essentials, but it also puts the cherry on top for a superbly comfortable experience.
My only gripe is that it’s useless without charge – the electronic recliner will power off too, leaving you stuck in one position with no way to change it. This is easily solved if you’re always near a plug for the power cable, or willing to charge the battery for wireless use, but the latter can be a little tedious (especially as the battery can drain fast) – so think twice about this chair if sockets are at a premium.
DXRacer Martian Pro: Price and availability
- Costs $899 / £580
- Premium features justify premium price
- Only available in one color at the time of reviewing
The DXRacer Martian Pro will set you back $899 / £580 (Australian pricing isn’t available at the time of reviewing) and can be picked up from the DXRacer store.
This price, especially the US cost, puts it into the higher tier of gaming chairs, which makes sense given that this chair is enhanced with various technological goodies.
These upgrades make it an attractive offering over less technologically impressive alternatives if you have the cash to splash, but if you’re on a budget, you can get by with less flashy alternatives.
DXRacer Martian Pro: Specs
|
Price |
$899 / £580 |
|
Dimensions |
49.6 x 27.6 x 21.9in / 126 x 70 x 56cm |
|
Max user weight |
275lbs / 125kg |
|
Min seat height |
17.7in / 45cm |
|
Seat width |
22in / 56cm |
|
Warranty |
2 years |
DXRacer Martian Pro: Design and aesthetics
- Classic black look with minimalistic accents
- Premium feel
- Some noticeable branding
The DXRacer Martian Pro comes in one design: black with red arrow accents.
It’s certainly not as loud design-wise as my trusty Spider-Man themed seat, and it definitely sits towards the professional end of gaming chairs, but it’s not a plain design either, if that is essential for your needs.
The fabric choice is a faux leather that feels premium to the touch, and is easy to wipe clean, with the accents being stitched on in red. Though I’d be careful not to spill anything too much on the chair, as the seat and backrest have some mesh elements (to help with airflow from the heater and ventilation) that I wouldn’t want to pour a lot of liquid on.
As for the armrests, they feature the 4D adjustments we expect from gaming chairs worth their salt – they can be moved up/down, pulled in/out, pushed forward/backward, and can tilt left/right to provide the ideal position.
Once you’ve set your armrests’ stance, they’ll then lock into place securely.
The side controls that adjust the backrest tilt and the airbag lumbar support are plasticky and feel a little less premium than the actual chair itself, but they don’t ruin the overall aesthetic experience delivered by DXRacers’ Martian Pro.
DXRacer Martian Pro: Comfort and adjustability
- Plenty of adjustment options
- Built in heater, fan and massager
- Cushiony despite the gizmos
Even ignoring the massaging and heating enhancement, the DXRacer Martian Pro chair has a full range of comfort and adjustment options.
Firstly, using a control on the side of the chair you have the ability to recline the backrest gradually from further forward than you’d want to about as close to horizontal as possible without this chair becoming a bed – though with the back massager active this ultra recline supremely relaxing to the extent you could drift off (definitely, totally, assuredly not speaking from experience).
Then there’s the 4D armrests I mentioned above, and of course, the height adjustments you’d expect from a standard office chair.
The seat is a good size too, with enough room to sit comfortably cross-legged when I want.
Though for the lumbar support, I’d maybe knock a point off simply because the airbag design can be a little more finicky to adjust compared to a traditional pillow. The advantage is that once set, you don’t need to worry about it slipping out of place, but finding the comfiest position took more time than I’d have liked.
Your neck pillow, on the other hand, is much easier to get right. The magnetic attachment makes it supremely easy to find the exact right spot for it on the headrest, while holding it securely in place once you’ve made your placement decision.
But of course I can’t not devote some space to the heating, cooling, and the massager.
Starting with that third one, the massager is activated by pressing the M-button on the side of the chair and can swap between different modes by pressing it again, or switched off by holding the button down.
The massage is delivered by in-built actuators – four pairs (one for your right and one for your left) which start at your lower back and end around your shoulder blades – and while its isn’t especially intense, it can provide some much-needed relaxation during a stressful gaming session, or your work day.
Just note, it can be a little noisy.
Now for the heating and ventilation. These are built into the seat and activated via two buttons found below the right armrest – one for each option. Long pressing once activates the heating/cooling, then quick pressing it changes the setting between three strengths – long pressing again turns it off.
I was surprised by how quickly the heating kicks into gear even at the lowest setting, and over the colder months when I’ve been testing this chair, it has provided me with some much needed warmth. The fan is also great for cooling you down, and I expect I’ll be relying on it plenty come the summer.
Despite being jam-packed with electric gizmos, the chair feels pretty darn comfy. I use it all day, every day for work and enjoy every moment – and not simply because of the heater and the massager.
DXRacer Martian Pro: Assembly
- All required tools included in the box
- A little heavy thanks to electrical components
- Can be built alone, but would recommend getting a friend
Putting the DXRacer Martian Pro together was fairly straightforward. I was able to assemble it all on my own using just what came in the box, thanks to the clear instructions.
However, given the inclusion of massaging and heating components, this can make parts of the chair a little heavier than normal, so having an assistant to aid your construction is advisable, as it should make the process even smoother.
Should I buy the DXRacer Martian Pro
Buy it if…
Don’t buy it if…
Also consider
| Row 0 – Cell 0 |
DX Racer Martian Pro |
Secretlab Titan Evo 2022 |
AndaSeat Kaiser 3E XL |
|
Price |
$899 / £580 |
$549 / £469 / AU$799 |
$389 (around £290 / AU$580) |
|
Dimensions |
49.6 x 27.6 x 21.9in / 126 x 70 x 56cm |
51.2 x 27.6 x 19.3in / 130 x 70 x 49cm |
54.3 x 29.1 x 29.1in / 138.0 x 74.0 x 74.0 cm |
|
Max user weight |
275lbs / 125kg |
285lbs / 130kg |
395lb / 180kg |
|
Min seat height |
17.7in / 45cm |
17.7in / 450mm |
18.1in / 460mm |
|
Seat width |
22in / 56cm |
18.5in / 470mm |
21.1in / 535mm |
|
Warranty |
2 years |
3 years |
3-years |
How I tested the DXRacer Martian Pro
I tested the DXRacer Martian Pro over a few months of UK Winter, giving me plenty of reason to use the in-built heater. It was my work office chair every day I worked from home during that time, and I also used it for PC and handheld gaming most days as well.
I also compared it to a handful of other gaming chairs we’ve tested, and of course, my trusty Spider-Man Anda Seat seat.
Read the full article here
