Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Sony PS-LX3BT: Two-minute review
The Sony PS-LX3BT is one of the first new turntables to leave Sony’s R&D department in years. It comes some time after the launch of the Sony PS-LX310BT, one of what TechRadar rightfully deems to be the best turntables for beginners — and has big shoes to fill, accordingly.
And fill them it sort-of does, at least in the most literal of senses. It shares a lot of physical attributes, aims for the same sleek aesthetic, and seeks to corner the same, well, corner of the market with user-friendly interfaces and a no-nonsense approach to playing records. It’s a shame it doesn’t quite stick the landing.
Price is the major sticking point for me — its launch price far overshot similarly specced, and better-featured, turntables in the same market. This was the backdrop against which certain bugbears became serious missteps — from a stylus that Sony insists you need to replace through them, to a cheap-feeling body that feels like it’s come from a device a third of the price.
These things overshadow the PS-LX3BT’s capable performance with audio, via its decent on-board preamp and its star-of-the-show press-and-play Bluetooth connectivity. It could be good — it is good, by some metrics — but not for where it’s asking to sit.
Sony PS-LX3BT review: Price & release date
- Unveiled February 2, 2026
- Priced $399.99 / £299 / AU$469
The Sony PS-LX3BT is a fully automatic, Bluetooth-enabled plug-and-play turntable, with an eye cocked squarely at the upper limits of the entry level. At its launch price of $399 / £299 / AU$469, it’s not what I would call cheap; in fact, it’s undercut by a fair few near-equivalent competitors — most compelling of which is the Audio-Technica AT-LP70XBT.
Then, there’s this turntable’s own sibling (they actually launched together), the Sony PS-LX5BT which is pricier but adds a more delicate stylus pressure of 2.0g ± 0.5g, a thicker and more premium rubber mat, a tweaked circuit design engineered to suppress unwanted vibration, a dedicated gold-plated audio jack out port (something not present here) with a cable in the box, plus a slightly more high-end, all-black finish.
Most other competitors in the market, though, do not have ‘Sony’ tastefully emblazoned on the chassis. Sony is a tried-and-tested household brand for AV tech, be it TVs, games consoles, CD players or integrated hi-fi systems.
Hence, the brand is likely better-trusted by new or returning vinyl enthusiasts to deliver something intuitive, fuss-free and of a minimum quality. Is this trust well-founded? The 2019 Sony PS-LX310BT was a huge success, but it was also a lot cheaper (depending on where you lived), having launched at $199 / £200 / AU$399. So, you can see the issue…
Sony PS-LX3BT review: Specs
|
Dimensions |
430 mm x 117 mm x 366 mm |
|
Motor |
Belt drive |
|
Platter |
Die-cast aluminum |
|
Phono preamp |
Yes |
|
USB |
No |
|
Bluetooth |
4.2 |
|
Speeds |
33 1/3, 45 RPM |
|
Stylus |
Moving magnet |
|
Extras |
USB-C power adapter, 45 adapter |
Sony PS-LX3BT review: Features
- Fully automatic operation
- AptX Adaptive Bluetooth output
- Built-in phono preamp and gain control
The Sony PS-LX3BT is an automatic turntable; this means it can be operated entirely by the array of buttons and switches adorning its anthracite-hued surface. Simply select the size and speed of your record, then use the buttons at the front to control the placement or removal of the tonearm. The platter’s rotation is triggered by moving the tonearm past a certain point, so even if you want to use the PS-LX3BT manually (by virtue of the silver finger-rest protruding from where the headshell would be) you literally only have to lift a finger to play a record.
Automatic turntable mechanisms are not so new, and this mechanical design doesn’t sound especially new either, with some familiar clunks and whirrs I know from my old Rotel system. What is, at least slightly newer, though, is Bluetooth connectivity, which the PS-LX3BT quite proudly has. More specifically, there’s aptX Adaptive Bluetooth transmission, for low-latency, high-resolution streaming from the turntable to your Bluetooth receiver of choice and accessed via a suavely flush button in the front-left corner of the chassis face.
On top of this Bluetooth connectivity, the LX3BT has connections the old-fashioned way, via a hard-wired stereo RCA cable out from the back. It’s an odd choice to use a permanently attached cable instead of a port – and at that, given the audience for this thing, I’m surprised there isn’t a 3.5mm Aux out either.
Still, that RCA cable feeds a built-in and switchable phono preamp, which means you can plug your turntable in most any amplifier without needing an extra gain stage. On top of that, there’s a gain switch that lets you boost or attenuate your turntable’s output by 4dB. Surprising in a different way; thoughtful, even.
The LX3BT has, like many other entry-level turntables of its ilk, a completely built-in cartridge arrangement with a replaceable stylus element. The stylus part here looks strikingly like one of Audio-Technica’s AT-3600 series, but is “designed specifically for this turntable”, according to Sony’s website FAQ. With a bit of sleuthing, the stylus does appear to be Audio-Technica’s AT3600LAX, a conical stylus with a carbon-fiber cantilever – though Sony’s specs point to a slightly heftier 3.5g tracking force. (Incidentally, my own tracking-force measurements of the tonearm put its exertion at a, for me, troublingly high 3.7g.)
Crucially, this thin layer of proprietariness creates an uneasy route to self-replacement, or indeed upgrade. Sony would prefer you go through its dealers or customer service department for a like-for-like stylus replacement, indicating that “other styluses are not supported”. Built-in cartridges and replaceable styli can be clever entry-level phenomena, and can be executed transparently well, but here, in this manner, it trends a little too close to being anti-consumer for my liking. Minus thoughtfulness points.
Sony PS-LX3BT review: Sound quality
- Warm, clear sound from stylus
- Faultless Bluetooth transmission
- Clean, clear built-in preamp
For all the grumblings I’ve leveled at the Sony PS-LX3BT thus far, I will contend that it actually does sound good. That definitely-not-an-AT-3600L-in-a-moustache cartridge presents a perfectly reasonable quality of sound — great, even, for its place in the market.
True to the marketing copy, the LX3BT sounds warm, the general color of its cartridge being a little on the soft side with some noticeable roll-off towards the upper reaches. Future Islands’ As Long As You Are sounds no less rich for this character, all big, warbly synths and croon-adjacent missives throughout. It’s an enjoyable listen.
Testing the 7-inch functionality of the automatic mechanism, I chucked on early-80s groover Emergency (Dial 999) by Loose Ends (a DJ-set staple, and an undeniable bop besides — fight me). It ended up being a great conduit by which to recognize the strengths of the PS-LX3BT’s built-in phono preamp. Often in budget turntables, these can be brittle or a little saturating; this one is clear and full, rendering those snappy standout snares and breakout vocal refrains in gratifying detail.
The whole outfit seems to benefit guitars and vocals over anything, though everything sounds, to some extent, present and fulsome; Ryuichi Sakamoto’s Risky, featuring Iggy Pop, is a sparse arrangement benefited by Iggy’s game attempt at a Let’s Dance-era Bowie impression — his voice is a raspy little joy all the time, but rendered to some good effect here.
Unobtrusively good sound quality notwithstanding, the aptX Adaptive Bluetooth connectivity is arguably the star of the show. It’s fast to connect to, and, with regards to fidelity, sounds indistinguishable from its analog alternative. I had a whale of a time in the kitchen listening to Mitski’s Nothing’s About To Happen To Me, in all its full and heartbreaking glory, fuss-free.
- Sound quality score: 4 / 5
Sony PS-LX3BT review: Design
- Cheap-feeling construction
- Easy to set up
- One-touch Bluetooth
Pulling the PS-LX3BT out of the box, I found the chassis to be quite light. Surprisingly light, even. Putting it together, it became clear that almost every element was some form of plastic — besides occasional aspects, and the die-cast aluminum platter. It’s not a reassuring weight, though the turntable is undeniably stable on its feet.
I’m more disappointed by the perceivable cheapness of the construction on display here. A series of design decisions were made that preferred cost to user experience, leading to a pretty nasty-feeling finish on the chassis shell, a flimsy tonearm rest clasp that doesn’t actually clasp, and a spring-assisted tonearm that inspires little confidence.
At least the LX3BT is an easy thing to set up — as easy as seating the platter belt, plugging in a power adapter and delivering the hardwired stereo RCA cable to your amp or speaker of choice. It couldn’t be more plug-and-play, nor more foolproof to use via its clearly labeled buttons and knobs.
Again, the best bit of the Sony PS-LX3BT seems to be its Bluetooth. Where many other devices struggle unduly with one-touch connectivity, connecting this turntable to my portable speaker was the easiest time of my life; a single button press, a modicum of patient waiting with speaker held (camply) in-hand, and it was paired.
This aptX Adaptive connectivity can be utilized simultaneously to the PS-LX3BT’s analog outputs, too. This means dual-zone listening; I got to enjoy hi-res Mitski in the kitchen while my wife bopped along in the living room, too. And, again, it sounded great! A positive side-effect design decision, that pitches the Sony LX3BT well for casual home listening.
Sony PS-LX3BT review: Value
- Great-sounding entry-level turntable…
- …that’s fundamentally overpriced
- And doesn’t allow self-replacement of stylus
To be completely frank, I find it difficult to square the price of this against its own quality, let alone the standards set by other turntable brands. It’s the top end of the entry level, and yet it has the same unfriendly design principles as the cheap-and-cheerful, ten-a-penny budget turntables it’s meant to outclass.
The caveat is that it does, ultimately, deliver on its core purposes. It’s an automatic turntable, and it does indeed automate much of the turntable-playing process — for the most part successfully, too. It’s a Bluetooth-enabled turntable, and its Bluetooth just works, which is something you can’t say for some other devices. And through it all, it sounds pretty darn decent.
But these are all things that turntables a third cheaper can offer. You deserve so much more for $400 / £300 than a brand logo; if you let it, that same amount of investment could buy you a solid turntable that delivers better quality sound, and gives you the keys to the kingdom vis-a-vis calibration and repairs too.
Here, it is worth my acknowledging that, in the intervening weeks since the LX3BT’s launch, there seems to have been a post-launch price-adjustment of sorts; many outlets are offering it at $348 / £250, or even slightly less. This makes the turntable a much more palatable prospect investment-wise, but I do think my criticisms stand — and that other turntables have met the moment a little better.
Should I buy the Sony PS-LX3BT?
|
Attribute |
Notes |
Score |
|
Features |
AptX Adaptive Bluetooth and a fully automatic mechanism let down by an opaque approach to stylus and stylus replacement |
3 / 5 |
|
Sound quality |
Warm, full sound; a clear preamp and unobtrusive Bluetooth connection make for clear and easy listening |
4 / 5 |
|
Design |
A quintessential Sony design, sleek and minimal — but cheap in-hand, in a number of places |
3 / 5 |
|
Value |
A hard turntable to recommend at its launch price — cheaper and better-specced competitors exist |
2.5 / 5 |
Buy it if…
Don’t buy it if…
Sony PS-LX3BT review: Also consider
| Header Cell – Column 0 |
Sony PS-LX3BT |
Audio-Technica AT-LP70XBT |
FiiO TT13 |
|---|---|---|---|
|
Dimensions |
430 x 117 x 366 mm |
110 x 400 x 330mm |
114 x 450 x 350mm |
|
Motor |
Belt drive |
Belt drive |
Belt drive |
|
Platter |
Die-cast aluminum |
Die-cast aluminum |
Die-cast aluminum |
|
Phono preamp |
Yes, switchable |
Yes, switchable |
Yes |
|
USB |
No |
No |
No |
|
Bluetooth |
SBC / aptX / aptX Adaptive |
SBC / aptX / aptX Adaptive |
SBC / aptX / aptX LL / aptX HD |
|
Speeds |
33 1/3, 45 RPM |
33 1/3, 45 RPM |
33 1/3, 45 RPM |
|
Stylus |
Moving magnet |
Audio-Technica AT-VM95C |
Audio-Technica AT3600LA |
|
Extras |
Dust cover, 45 adapter |
Dust cover, felt mat, 45 adapter, 1m RCA cable |
Dust cover, remote control, RCA cable |
How I tested the Sony PS-LX3BT
- Tested for 4 weeks
- Used as a part of a living-room hi-fi system
- Tested with a Cambridge hi-fi amplifier and Dali Sonik 1 bookshelf speakers
The Sony PS-LX3BT spent a month or so atop my living-room hi-fi stack, as my primary means of listening to records. As such, its output was treated by a Cambridge Audio A2 integrated amplifier, which itself fed a pair of Dali Sonik 1 bookshelf speakers.
Bluetooth connectivity was tested with my trusty kitchen speaker, a Soundcore Motion 300. For testing, I listened to a wide variety of favored records across genres, to get a comprehensive feel for the LX3BT’s performance.
Read the full article here
