Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Ecovacs Deebot X8 Pro Omni: Two-minute review
I’ll say one thing about Ecovacs Robotics: the brand might make too many robot vacuums that I, as a reviewer, can’t keep up with, but they all seem well thought out and catering to different needs and budgets. In 2024, it released a good-value robovac that I really liked in my Ecovacs Deebot T30 Omni review, and it’s impressed again with a higher-end model in the Deebot X8 Pro Omni reviewed here.
The X8 has plenty of smarts on board, with Ecovacs’ voice assistant Yiko now better at understanding commands and having a more conversational interaction than its previous iterations on older Deebots. Even if you don’t interact with Yiko, the X8 has plenty of automated voice prompts that I very quickly found to be annoying – there’s only so many times you can hear it say “don’t worry” when its auto-emptying. While you can’t switch these off, you can mute the volume entirely and depend on the app notifications to find out if the robot needs help at any time (like if it’s stuck somewhere).
There’s Google Assistant and Alexa support as well, but Yiko can handle a few extra commands that I found the other two voice assistants couldn’t handle. To futureproof your smart home, the X8 Pro Omni also has Matter support, so you can control several smart devices via a single hub.
There’s a camera on board that the bot uses to ‘see’ its surroundings for better navigation and obstacle avoidance, but it also provides a live feed that requires a passcode to be set up for access. There’s a Patrol mode here that turns the X8 Pro Omni bot into a security unit and it saves a bunch of photos for you to view whenever you like. You can also speak to your pets or kids if you need to check in on them (spy?) while you’re at work. I’ve asked Ecovacs for clarification on how secure the camera is from hackers and will update this review as soon as I hear back.
These smart bells and whistles are all great, but this robot vacuum shines at its most important function: cleaning. It’s arguably one of the best automated cleaners I’ve tested in 2025, with edge cleaning its biggest asset thanks to an extending side brush and wet roller while vacuuming and mopping respectively. In fact, I’ve seen the X8 Pro Omni travel far closer to walls and furniture than many of its competitors, thus allowing its extendable parts to do their job effectively.
It puts its 18,000Pa of suction power to good use, with my carpets looking fresh and clean after a single run on its highest suction setting. It did a better job than what I saw in my Roborock Qrevo Edge review despite 18,500Pa of suction. And its roller mop was quite impressive compared to the mops pads I’d gotten used to previously, and that’s despite Ecovacs saying there’s no pressure applied by the roller on the floor.
There’s also a detergent dispenser on board and use of the soap is automatic provided you toggle it on in the app – Ecovacs says there’s always a ratio of 200:1 detergent and water mix in the pipeline to ensure the correct usage. Even without detergent I found my floors were left stain-free after every mop – in fact, it was better than I experienced in my Narwal Freo Z10 review that, at the time, I said had excellent mopping skills.
In four weeks of testing, the X8 Pro Omni got entangled in a cable just once because the side brush pulled a low-hanging wire towards the bumper, but otherwise its obstacle avoidance is very good. Even more impressive is its overall navigation – it invariably took the path of least resistance in my apartment, which meant it got its tasks done relatively quickly and, importantly, without consuming too much battery life.
Even the base station performance is top notch, with the onboard bin getting cleaned quite well each time it empties, and the wet-roller cleaning is impeccable. Water consumption is also lower than any other robovac I’ve tested before – I’ve previously had to refill the clean water after every full cleaning cycle in my small inner-city apartment, but this time I’ve had to do so once every four or five sessions (depending on its routine).
All in all, this was excellent performance from not just the robot vacuum, but I commend Ecovacs for streamlining its app experience as well. It’s much nicer to use, with plenty of customization options to suit your personal cleaning needs. Importantly, these custom routines are now very easy to access.
It’s relatively noisier than some of its newer competitors, and it can’t perform the climbing feats of the more expensive Dreame X50 Ultra, but if you value excellent cleaning performance above all else, I’d find it very easy to recommend the Deebot X8 Pro Omni – and it’s often discounted.
Ecovacs Deebot X8 Pro Omni review: price & availability
- Available since March 2025
- List price: $1,099 / £1,099 / AU$2,499
- Incurs ongoing costs for dust bags and detergent
There are quite a few all-in-one robot vacuum cleaners at the same price point that Ecovacs Robotics is selling the X8 Pro Omni, but I think the Deebot can justify its premium cost on its feature set and performance.
It’s listed for $1,099 / £1,099 / AU$2,499 at full price but, at the time of writing, US and UK customers could pick it up for $899.99 / £999 respectively directly from the Ecovacs website. In Australia, it has dropped to AU$2,199 previously, but I suspect there’ll be better discounts around the world during major shopping events like Black Friday sales. It’s also available from select third-party retailers, including Amazon.
This price gets you not just excellent performance (explained below in detail), but you also get an impressive set of features, including voice assistant and Matter integration for a smarter home setup. With that in mind, I think the X8 Pro Omni is well priced compared to some of the other robovacs on the market, although Ecovacs has cheaper models that clean really well, as proved by the Deebot T30 Omni.
As an example of competitor pricing, the Narwal Freo Z Ultra cost $1,499/ AU$2,499 (unavailable in the UK) and is a good machine, but has 12,000Pa of suction compared to the Deebot’s 18,000Pa. Matching the suction power at 18,500Pa is the Roborock Qrevo Edge, but I found it hard to recommend at its list price of $1,599.99 / AU$2,799 (unavailable in the UK) based on its performance alone. On the other hand, Ecovacs’ own Deebot T50 Max Pro Omni has 18,500Pa suction, the Yiko voice assistant and promises good cleaning at a lower price point of $799.99 / £799 / AU$1,799.
If you want more suction power, you’ll have to pay a lot more. For example, the Roborock Saros 10 with its whopping 22,000Pa of power will set you back $1,599.99 / £1,499.99 / AU$2,999 at full price, but is often discounted to match the X8’s retail cost. The Dreame X50 Ultra Complete with 20,000Pa of suction is also expensive compared to the X8 Pro Omni, coming in at a list price of $1,699.99 / £1,299 / AU$2,999, but it can climb low steps that many of the newer machines can’t.
As with any other hybrid robot vacuum, there is the ongoing cost of purchasing dust bags and detergent to take into consideration, although the latter is an optional add-on but I can see the need for it in homes with toddlers and pets. Unlike other brands, though, Ecovacs doesn’t supply a bottle of detergent in the box – at least not in Australia, where the testing for this review was conducted, due to “customs issues with international shipments” – so that’s $49.98 / £44 right off the bat for two 1L bottles in the US and UK (frequently discounted), but the same two-pack isn’t available in Australia where a 1L bottle retails for AU$37.50.
The antibacterial dust bags come in packs of three and are available directly from Ecovacs Robotics for $24.99 / £17.99 / AU$29.90 at the time of writing.
Despite the ongoing cost, I think the Deebot X8 Pro Omni balances its feature set, performance and price well, but I’d recommend picking it up during a sale as it’s frequently discounted.
• Value score: 4 / 5
Ecovacs Deebot X8 Pro Omni review: specs
|
Suction power: |
18,000Pa |
|
Onboard bin capacity: |
220ml |
|
Dust bag capacity: |
3L |
|
Clean water tank capacity: |
4L |
|
Dirty water tank capacity: |
4L |
|
Reservoir capacity: |
110ml clean; 95ml dirty |
|
Mop lift: |
10mm |
|
Noise level: |
up to 75dB |
|
Battery capacity: |
6,400mAh |
|
Runtime: |
up to 228 minutes / up to 240sqm (2,580 sq ft) |
|
Charging time: |
4.6 hours |
|
Dimensions: |
Robot = 353 x 351.5 x 98 mm; base station = 350 x 477 x 533 mm |
|
Weight: |
Robot = 5.3kg; base station = 7.6kg |
Ecovacs Deebot X8 Pro Omni review: Design
- Gold accents give it a classy look
- Extending side brush and wet roller mop
- Taller than the average robot but lacks a turret; tall but slim base station
I only had to take the robot out to see that Deebot X8 Pro Omni exudes class, thanks to some gold-colored accents on the otherwise black machine. Unlike the Narwal Freo Z10 that I reviewed prior to the X8 (which was a 11kg weight straight out of the box), the Deebot comes packed in layers, which makes it very easy to set up.
Robot design
Once you remove the wash tray from the top of the box, the next item to emerge is the X8 robot. The first thing that distinguishes it from many other robovacs is the lack of a top turret that typically houses the navigation tech. In the X8 Pro Omni, though, all the necessary sensors are on the front and the sides.
The lack of a turret means the X8 can roll under many low-lying pieces of furniture, although it’s doesn’t have the slimline form factor of the Roborock Saros 10R – it’s a little taller, standing at 9.8cm/3.8in compared to the Saros at 8cm/3in, so there needs to be a minimum clearance of 10cm/4in for the Deebot to clean where many other robovacs can’t.
A black plastic disc with the Ecovacs logo in gold covers the top of the robot, with a cutout to show off a gold three-pronged button. There’s a tiny power icon in the center of the button to indicate that it’s functional, but it’s easy to miss and can appear purely decorative, although it lights up when in use and charging. Its functionality is listed on a large piece of cardboard inside the packaging: a short press to start or pause, a double press to extend or retract the wet roller, and a three-second long press to send the bot back to its dock. In the four weeks I spent with the machine, I never found the need to use the button – the robot does everything seamlessly.
Also under the top cover is a removable 220ml/7.4oz dustbin whose filter can be taken out for regular cleaning, plus a toggle switch for power, a Wi-Fi indicator light and a QR code to begin your app setup.
On the front of the robot are LiDAR sensors that it uses for mapping your home, while a camera also peeping through the same front window adds visual information that’s paired with artificial intelligence (AIVI) to navigate around obstacles. Along the sides are edge sensors that prevent it from banging into a wall or furniture, yet allowing the bot to get really close for effective cleaning. A mic and speaker are also housed within the front window.
The back of the robot has two charging points, but there’s also a water compartment inside with a clean capacity of 110ml and 95ml for dirty mop water. While you never have to worry about the water reservoir after setup, it can be released using an inset lever.
As with nearly every other Deebot I’ve tested (and many other brands besides), the underside of the robot houses the central bar brush that sports bristles arranged in a V shape to help it gather hair and fur without itself getting entangled. A single side brush towards the front of the bot rotates at varying speeds automatically depending on the size of the debris it senses – it slows down for larger pieces, similar to some of the high-end Roborocks. It can also extend out to reach into corners and clean along edges – both of which it manages to do better than many of its competitors because the robot itself gets really close to walls.
The rear of the undercarriage is dominated by a wet roller rather than circular mop pads which, according to Ecovacs, spins at a speed of 200rpm and has a scraper in its holder that constantly cleans out the dirty water as it rotates. 16 nozzles keep it supplied with clean water (and detergent if you’re using any).
The main wheels are quite large and, for the first time in any robot vacuum I’ve tested, I found them to be quite noisy when traveling over the tiles in my home. The sound was akin to very hard or brittle plastic moving over a rough surface, but in my time testing the X8 Pro Omni, I didn’t notice too much wear and tear on the wheels to account for the sound. A small omnidirectional caster wheel completes the robot’s physical setup.
Base station design
The base station itself isn’t much to write home about and is quite similar to several other models on the market. However, the gold accents on the lids of the two water tanks and branding on the front of the dock makes it look quite smart. The tanks have a 4L capacity each and are very easy to lift up, refill or clean out, then replace back on the dock.
Below the tanks is a covered nook that houses the detergent dispenser and a 3L dust bag. The dispenser is very easy to slide out and refill, while changing the dust bag is also very intuitive. It’s the cover for this nook that takes a little effort to remove each time you need access to either of its two inmates – it clips in very tightly indeed and you’ll need to pull it with some force from the bottom of the panel.
Under the covered nook is the cavity for the robot, which sits on a washing tray. Inside the cavity, on the rear wall of the base station, you’ll notice nozzles and charging points that keep the robot doing what it needs to do.
The base station is about as tall as many other brands offer, but it’s a little slimmer than, say, a Narwal dock. It will still need a decent amount of space to house, with enough clearance on the top to allow you to remove and replace the tanks.
• Design score: 4.5 / 5
Ecovacs Deebot X8 Pro Omni review: Performance
- Excellent vacuuming on high suction; top-notch mopping at most waterflow levels
- Arguably one of the best edge cleaners in the business
- Very good navigation and obstacle avoidance
The X8 Pro Omni for this review was tested in a 40sqm/430sqft inner-city apartment in Sydney, Australia, with the single bedroom fully carpeted, but the rest of the rooms featuring matte-finish tiles. The bathroom, however, has smoother tiles than the rest of the hard floors and it was part of the full map that the X8 had to clean. There are no stairs in the apartment to test cliff sensors, but there are a couple of low thresholds that were useful to test the X8 Pro Omni’s ability to clear some obstacles.
It’s also important for me to mention that I have no pets, but I’ve always found my bedroom carpet covered in my own (long) hair within 3-4 days of cleaning it, and is usually a very good test for any vacuum cleaner that I review.
Before starting the first cleaning session, I not only set up some custom routines (called Scenario Cleans in the Ecovacs Home app), but I also went through the advanced settings to toggle on some key features, including the carpet-first option as I have mixed flooring. This ensured that no matter what custom cleaning routine I might use, carpets were always vacuumed first to minimize the risk of them getting wet (more on the app experience later).
Overall performance of the X8 Pro Omni was excellent, but it’s important to note that it’s best used for the regular maintenance cleaning sessions that you might need on a daily or a weekly basis. It can’t replace the best cordless vacuum cleaners, but it definitely reduces the human effort and time spent on keeping your floors spick and span.
Vacuuming
Let’s start the performance section with the most basic function: vacuuming. I’ve already mentioned earlier in this review that the X8 Pro Omni was one of the best cleaning machines I’ve tested recently, exceeding the vacuuming performance I got from a Roborock and a Narwal that I tested prior to the Deebot. It really does put the 18,000Pa – which is in no way class-leading now – to very good use, particularly at its higher suction settings.
I usually have to set most robovacs to their maximum suction setting to get a decent clean on the bedroom carpet which, as I’ve described above, can get covered in my own hair within days. It’s been rare for me to see that carpet completely hair free after a single session even using the highest power level on other robovacs, but the X8 Pro Omni was been able to do just that each and every time it’s done a bedroom clean on its Max setting.
The Deebot’s got four suction settings and while I wasn’t particularly keen on the Quiet option which reduces the power significantly, I found the Standard and Strong settings to be perfect for hard floors, not once needing to step it up to Max on tiles.
The X8 Pro Omni has a suction-boost option which, as the name suggests, automatically increases power when it detects carpets, but I wasn’t able to notice the dynamic suction from sound alone when it went from hard floor to the mid-pile rug in my living room, although it seemed to do a very good job anyway. The audible change in suction was heard when it was vacuuming tiles in my kitchen, just under a cabinet – go figure.
To check its vacuuming abilities further, I conducted TechRadar’s standard tests of sprinkling tea dust and oats (representing two different-sized debris) on both hard floors and carpets. Doing a Zone clean and set at Strong suction, you can see from the video clip below that the X8 Pro Omni did a fantastic job on the tiles, even sucking up the tea dust from along the edge of the room.
If you look closely, you’ll also notice that the side brush slows down when it detects larger debris (oats) to make sure they all get pulled towards the bar brush.
On the carpet, which was also just a Zone clean done as a separate test, I set the robot to Max suction and found it cleared up the oats very well indeed, although tea dust that went deep into the fibers remained, and is visible in the video clip as a dark patch. I used my finger to loosen the carpet fibers and let the X8 run over it again, and voila, it was all cleaned up.
For both tests, I had the X8 Pro Omni set at moving in the Deep Clean pattern, which covers maximum floor space but time consuming, and I didn’t find the need to go over either of the spots with my Dyson V15s Detect Submarine.
Mopping
This is the first robot vacuum I’ve tested that features a wet roller rather than a pair of rotating mop pads and I really wasn’t sure what to expect. Needless to say, the X8 Pro Omni exceeded my expectations and then some with the way it tackled my hard floors. I will go so far as to say this was arguably the best mopping I’ve seen in a while by a robot vacuum.
From shaved Toblerone on the kitchen floor (I was making Toblerone cheesecake at the time) to a partially dried dollop of coriander-mint chutney, I was very impressed with how well it mopped up different (dry) spills.
I specify dry because you really don’t want a robot vacuum to clean a wet spill like cereal milk or curry sauce as everything in the undercarriage will get wet with the sticky liquid or the sauce, including the wheels and side brush. Cleaning the bot after that will be a chore in itself.
As with many other robot vacuums like itself, the X8 Pro Omni has three waterflow settings (Low, Medium and High) with a total of 50 levels. The lowest settings would be good for sensitive wood floors but, for me, I’ve always found higher waterflow rates better for my tiles, so I had the Deebot set at level 40 most of the time as I found 45 and 50 made my tiles very wet indeed, while 30 and lower barely left a damp streak.
My kitchen floors, in particular, need regular mopping and, given it’s right beside the dining room, this area of my apartment was a good test for the X8 Pro Omni. I found that in its Deep Cleaning speed and water level set to 45 but no detergent, there was a visible difference on my floor after its first run compared to what the Dyson V15s Detect Submarine had done prior to switching to the Deebot.
In fact, I’m not sure how much difference adding the detergent has done to my floors because it mopped up dusty footprints and dried, dusty water stains very well without any soap, and it did just as good a job with.
The stress test I put the X8 under was mopping up a partially dried dollop of coriander and mint chutney – it took a couple of passes at water level 40 with detergent in the dispenser to mop it up entirely, no stain left on the floor. The issue here was that the rotating side brush scattered a tiny bit of dry chutney away, but given it was set to Deep Clean, the bot moved over the entire zone twice (more on this below in the navigation section), running perpendicular to its initial path, which meant that scattered bit got mopped up later.
I enjoyed watching the extendable roller sneak in and out of the robot as soon as it sensed something on its side. This could be a wall or a furniture leg, but I found that it hardly left a dry spot.
On the product listing page on the Ecovacs website, the brand says there’s no pressure applied by the wet roller on the floor, but given how well I saw it mop, I’d be surprised if this spec listing is correct. There’s surely some pressure being applied for such effective mopping.
Another thing I love about the roller is that it’s streak-free, particularly on the lower or mid waterflow rates. The only time I saw streaks (and not dirty ones, mind, just marks to show a mop has passed) was when the roller was saturated with clean water.
Navigation & obstacle avoidance
With the sole exception of one Zone cleaning session when it took the wrong path out of its dock to get to where it needed to in a different room, the Deebot X8 Pro Omni never once strayed from the path of least resistance.
It’s impressive navigation extends to doing full 360º rotations around furniture legs, and while the side brush didn’t always extend when I expected it to, the robot itself got so close to walls and furniture that I never had cause for complaint when it came to its navigation just millimeters from what is essentially an obstacle.
It’s three different “cleaning speeds” (or its movement pattern in a given space) are a little hit and miss if you really want a thorough job done. The best movement pattern I found was the Deep Cleaning, which means the robot cleans a space twice, first running in parallel lines just centimeters apart, then traveling perpendicular to ensure no spot is missed.
The other two cleaning speeds – Standard and Quick – aren’t bad, but because the parallel pathways are slightly more spread out compared to Deep Cleaning, I found that the occasional hair strand or speck of debris got missed. That said, “cleaning speed” as Ecovacs calls it is apt as these determine how quickly the X8 Pro Omni finishes its cleaning task.
Obstacle avoidance is also fantastic, as you can see from the video above when I conducted TechRadar’s standard test – creating an obstacle course of a slipper, shoe, a cable, socks and a tissue box. It avoided every single one of them without a hiccup, a feat I’ve not yet seen from any robot vacuum I’ve tested to date.
However, during one vacuum-only session in my bedroom, it got entangled in a USB-C cable that had one end dangling close to the floor and the side brush pulled it lower (see above image). I could hear Yiko complaining and a notification popped up on my phone that the X8 Pro Omni needed help. I disentangled it and it carried on with its work after I used a voice command to “restart cleaning”.
During a full-house clean, I shut a door to one room to see how it would react to its map not quite being accurate and it had no issues. It got close to the door, pivoted a little on an axis to see if it could spot an opening, but carried on doing what it needed to in the rest of the apartment without any complaints.
Base station performance
Whether it’s sucking out all the dirt and debris from the onboard dustbin or cleaning the wet roller, the X8 Pro Omni base station performance is so good that it justifies the high price tag this machine demands.
Only the tiniest amount of dirt remains inside the onboard dustbin after each vacuuming run that you, honestly, never have to worry about. The only time you’ll need to remove the small onboard bin is when the filter needs cleaning or replacing, or if something gets stuck inside that requires manual removal (never once happened during my testing).
The dustbag inside the base station has a 3L capacity, so it will last you a long while, albeit that will depend on how often you clean, how large your home is and whether you have pets.
Image 1 of 2
Dispensing detergent happened as required, as did filling up the robot’s onboard 110ml clean water compartment. Even pumping out dirty water from the 90ml partition worked well during my testing – you can remove this compartment to clean out the filter inside.
The washing of the roller was impeccable. It looked nearly new after my running it a few times a week for four weeks and the shortest two-hour hot-air drying is more than enough to ensure there’s no trace of dampness that could encourage bacterial or fungal growth. In fact, at the end of my four-week trial period, I found the roller soft to the touch as it was on day one.
The wash tray can also be cleaned out automatically by the machine from time to time, so the only hands-on task you’ll have to do regularly is clean out the dirty water and refill the fresh water. Every couple of months or so, you’ll also need to swap out the dust bag or refill the detergent dispenser if you’ve been using soap for mopping. The ‘health’ of all the accessories and parts is listed in the app, so you’ll know when to do what anyway.
Battery life
Ecovacs says there’s a 6,400mAh battery pack powering the X8 Pro Omni robot, which is rated for up to 228 minutes or a maximum area coverage of 240sqm / 2,580sq ft. In my testing – which admittedly was done in a much smaller space – I found that a number like that is nigh impossible to achieve unless you run the robot at the lowest settings possible, which I doubt anyone will want to do.
In Standard suction and medium waterflow levels during a full 40sqm clean doing a single vacuum-and-mop pass, the X8’s battery dropped to 20%. Bumping it up to Max suction and high waterflow rates, I found the robot needed to go back for a top up at the mains after completing five out of the six rooms in its map – about 78 minutes. Both these tests were conducted at the Deep Clean speed, so more time consuming.
Extrapolating that for Standard or Quiet cleans, you will be able to run the X8 Pro Omni for around 150 minutes, but keep in mind that it boasts dynamic suction as well, so total battery life will depend on how many carpets it encounters or how tough the cleaning job is.
That’s not bad battery life, but it’s not class-leading as models like the Narwal Freo Z10 and Dreame X40 Ultra can outdo the X8. Larger homes will find that a full cleaning task may well require recharging to complete. That said, the X8 is smart enough to learn how much battery it needs to finish a job, so a full-home clean may not necessarily take all day.
• Performance score: 4.5 / 5
Ecovacs Deebot X8 Pro Omni review: app control
- Improved Ecovacs Home app
- More streamlined setup for robot and base station settings
- Map might need extensive editing, but is easy to do
I’ve previously not been very impressed with the Ecovacs Home app as it wasn’t as streamlined as I would have liked, but that’s changed now – the updated version of the app that I used with the X8 Pro Omni is a significant improvement.
It’s now easier to access the custom cleaning routines – renamed Scenario Cleans from just plain ol’ Scenarios – as they’re listed on the homepage of the device, and each of these are also very easy to customize and set up.
To access more settings options, the Ecovacs Home app has always allowed you to ‘Enter’ a more detailed page with your home’s map laid out, but now the robot and base station advanced settings are right there on that same screen – the robot stuff is right at the bottom while switching tabs gives you the base station setup. This is a much better app experience than I encountered only a few months ago from the time of publication of this review.
As I’ve already mentioned, there’s the Yiko voice assistant on board and, in all honesty, I really don’t see the need for verbal communication with the device, but my inner lazy self took a shine to it for a very short time. All routines and settings work so well, that Yiko doesn’t need to be there, but it was nice to see that it can understand commands better than before.
During my testing, it didn’t comprehend its own name (see the screenshot below where it hears its name as “you go”), but that didn’t stop it from performing the task I asked it to do (pause cleaning). I immediately asked it to restart again – no problem whatsoever.
You’ll also hear a lot of oral prompts every time the robot has to perform a task. This can quickly get very annoying, particularly when the self-empty of the bin takes place because it’s a long, drawn-out message telling you “don’t worry” about the loud noises. There’s sadly no way to turn these off, but you can drop the volume right down to ‘mute’, but this also means you won’t hear when the bot needs help. Thankfully there are app notifications to help with that. The volume is also associated with a ‘ding’ sound the robot makes every time you adjust a setting – these too will be muted if you turn the volume slider right down.
Every setting on the app is well explained and easy to understand in case you want to use it, but I would advise that you take some time to go through all options before you begin using the X8 Pro Omni so that you get the best results possible.
For example, you can set and forget the cleaning sequence for the whole house and, no matter which rooms you choose for whatever custom routine you might have, the X8 Pro Omni will follow that. This can be edited at any time too. As I’ve mentioned before, you can also toggle on carpet-first cleaning in the robot settings, set how you want the auto-empty to take place or how often you want the wet roller washed. You even get control over how long you want the base station to spend drying it with hot air. You’ll also need to toggle on auto detergent use, otherwise the base station won’t use soap even if you’ve filled the dispenser.
There is a lot of control here, although it would be nice to see Ecovacs allow the user to choose how many passes the X8 will do when on an automatic AI-powered cleaning run (it’s always just one in this mode).
• App score: 4 / 5
Should I buy the Ecovacs Deebot X8 Pro Omni?
|
Attribute |
Notes |
Score |
|---|---|---|
|
Value |
Compared to other similarly specced models, the X8 Pro Omni is very competitively priced, balancing feature set, power, performance and cost quite well – plus it’s often discounted. |
4 / 5 |
|
Design |
It’s a very low-maintenance design with several parts that can be taken out to wash if necessary. And it exudes class. The lack of a turret means it can even roll under some low-lying furniture. |
4.5 / 5 |
|
Performance |
As long as you avoid using the X8 to clean wet spills, it will handle your regular cleaning with aplomb. It will even maintain itself well without too much intervention from you. |
4.5 / 5 |
|
App control |
The updated Ecovacs Home app is a lot more streamlined now and easier to use. |
4 / 5 |
Don’t buy it if…
Ecovacs Deebot X8 Pro Omni review: Also consider
How I tested the Ecovacs Deebot X8 Pro Omni
- Used three to four times a week for four weeks
- Tried various suction and waterflow levels in a 40sqm test space with mixed flooring
- Experimented with the Yiko voice assistant and tweaked various advanced settings
I received my review unit of the Ecovacs Deebot X8 Pro Omni in the third of week of July 2025 and spent the next four weeks running it on various settings and custom routines mostly three times a week, but it has done more sessions during the last week when I conducted my obstacle course test.
I found that once all the settings were as I’d want them, the X8 Pro Omni just did what it needed to do without any fuss. During that time, I found it didn’t use as much clean water as other robot vacuums (especially compared to the Narwal Freo Z10 I tested prior to it) and, hence, found I didn’t need to keep refilling the clean-water tank as much. Of course, that’s also because the test space is small (just 40sqm/430sqft) and has mixed flooring with carpet in the bedroom and a large rug in the living room.
I set up four different custom routines, or Shortcut Cleans as the app labels them, and tested each one 2-3 times over the course of the four-week testing period. I also ran single-room and zone cleaning sessions to see how the X8 Pro Omni performs in its auto-cleaning mode.
While I began testing the X8 without any detergent for the first week, I added a small quantity to the dispenser on week 2 of testing.
I put it through TechRadar’s usual tests for vacuuming and mopping (using oats and tea from a bag for the former, and a dollop of chutney for the latter). I also conducted our standard obstacle avoidance test, but threw in two types of socks and a tissue box for good measure.
As you’ve probably already read, the X8 Pro Omni passed all its tests with flying colors, with only the one hiccup when it got entangled in a low-hanging cable during a vacuum-only session.
Read more about how we test vacuum cleaners
[First reviewed August 2025]
Read the full article here
